Vertical Fiber Optic Splice Closure / Fiber Optic Joint Box With 4 Cable Ports
Functional characteristics:
1. The box body is formed by injection moulding of new ABS material. It has good anti-alkali corrosion and anti-aging properties, and its surface is clean and beautiful, its mechanical structure is firm, and it has strong anti-field environment performance. It can withstand severe climate change and harsh working environment.
2. Suitable for ribbon optical cable and ordinary optical cable. The fused disc in the box can be flipped by pages, and there is enough curvature radius and space for each optical cable and each optical fiber to be constructed separately.
3. Small size, large capacity and convenient maintenance.
4. Provide reliable cable fixing and cable reinforcement core grounding protection device.
Quick Detail about vertical fiber optic splice closure:
- Name: dome fiber optic joint splice closure box
- Part number: KCO-JX005-x(fo)
- Cable entry port: 4 ports
- Capacity of fibers: 96 cores
- Size: 400x140mm
- Material: PC Plastic
- Sealing structure: Screw Thread mechanical seal
- Cable Diameter: 7.0-22.0mm
- Working temperature: -40℃ to 65℃
- Application: Aerial, Direct buried, underground, pipeline, hand-holes
Working conditions:
Working temperature: -40 +55.
Relative humidity: <95%(+40 C)
Atmospheric pressure: 70kPa-106 kPa
Size:
Splice closures features:
- Two-way cable entries and exists design
- Can be fixed by metal work
- Clear optical fiber cable
- Closure body is made by Super PC material, and the bolt was made in stainless steel
- Can be reopened
Splice closures application:
- Telecommunication networks
- Local area networks
- Aerial hanger, Wall-mounting, Directly buried
- Widely used in FTTH access network
- CATV networks
Product pictures:
Vertical splice closure main components:
| No. | Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height x Diameter 355mm x 150mm |
| 2 | Fiber optic splice tray (FOST) | Max. 6 trays (bunchy) Max. 4 trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces) |
| 3 | Fiber holding tray | 1 pcs | Holding fibers with protective coat | |
| 4 | Base | 1set | Fixing internal and external structure | |
| 5 | Plastic hoop | 1 set | Fixing between FOSC cover and base | |
| 6 | Seal fitting | 1 pc | Sealing between FOSC cover and base | |
| 7 | Seal rings for inlet/outlet ports | 4pcs | For the inner seal of inlet/outlet ports; the diameter is 12.5mm,can shrink to 7mm | |
| 8 | Pressure testing valve | 1 set | After inject air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| 9 | Earthing deriving device | 1 set | Deriving metal parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
Vertical splice closure box main accessories and special tools:
| No. | Accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Customized | Protecting fiber splices | Configuration as per capacity |
| 2 | Nylon tie | Customized | Fixing fiber with protective coat | Configuration as per capacity |
| 3 | Earthing wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| 4 | Abrasive cloth | 1 piece | Scratching fiber cables | |
| 5 | Labeling paper | 1 piece | Labeling fibers | |
| 6 | Special wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | |
| 7 | Measuring paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| 8 | Seal tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| 9 | Insulation tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| 10 | Metal hoop | 1 set | For wall mounting and pole hugging | |
| 11 | Buffer tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| 12 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air | |
OEM/ODM Service:
If you want to display your own brand LOGO on the goods such as cable, package bag, label or any where. It is no any problem. Our OEM and ODM service is always ready to do it.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- Internatioal air: CA, AA, EA, etc
- By sea
